Automatic Spray Gun AU-180-DS, auto airless paint sprayer

这里可以自定义设置

Product features introduction

A universal cost-effective automatic spray gun that only needs 5 seconds to replace. It has the most compact space design and excellent paint atomization performance. It can spray almost any paint with a viscosity of 0 ~ 100CPS. Nozzle model 0.5mm ~ 2.8mm can be arbitrarily combined. The spray gun supports a special nozzle made of composite material. The service life of the nozzle can be increased to 9.5 billion times (tested in laboratory conditions, the actual life depends on the characteristics of the coating and the parameters of the compressed air. It is not a commitment of product quality) Packed in moisture-proof packaging, can be equipped with universal removal wrench (need to buy separately).

PRODUCT PARAMETER

All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.

Model	Name	Nozzle Diameter(mm)	Spray Distance(mm)	Air Pressure at Nozzle(MMPa)	Air Consumption (l/min)
AU-180-082P(V)	Small	0.8	200	0.29	270
AU-180-101P(V)		1.0			90
AU-180-102P(V)		1.0			270
AU-180-132P※		1.3			260
AU-180-152P※		1.5			280
AU-180-122P(V)	Big	1.2	250	0.29	530
AU-4D-152P※		1.5			330
AU-4D-202P※		2.0			360
AU-4D-251P※		2.5			360
AU-180/4D-R(V)	roundness	0.5	200	0.29	40
Output (ml/min)		Pattern Width(mm)	Air Cap Model	Air Compressor(KW)	Weight(g)
150		190	E2P	1.5～440	440
100		140	E1	0.75～
200		220	E2P	1.5～
250		230	H2
300		320	H4
500		400	G2P	2.2～	470
270		340	K2
400		320	R2
500		330	W1
20		35	-	0.2～0.4	425

这里可以自定义设置

■ The nozzle diameter also refers to the effective diameter through which the coating particles can pass. The data in the table in the front column is the code. The parameter code needs to be filled in when ordering.

■ The parameter reading in the atomization pressure needs to be read in conjunction with a professional spraying air pressure gauge. The parameters in the lower column are Mpa megapascal units, 1 MP ≈0.98Bar.

■ The front model is the model code of the universal circulation spray gun, and the model in the back column is our company's order model code.

■ The minimum particle diameter is measured by laser diffraction. Depending on the viscosity, there will be substantial differences. Do not use it as a basis for production. It is only used to distinguish the effect that the spray gun can achieve under specific conditions.

PRODUCT DETAILS

The gun body is made of ADC12 alloy. It is hot-formed by a 500T Nissan die-casting machine using a special mold. The air inlet interface adopts the design method of in-line hose, which reduces the customer's installation time and maintenance time. If equipped with our company's professional paint connector, the model is ACC. It only takes 5 seconds to replace a spray gun.

The spray gun nozzle is made of 304 stainless steel, which is resistant to corrosion and abrasion. At the same time, it is equipped with a compound needle with a patent number of CN107081232A to adapt to special performance coatings. Such as: ceramic coatings with high abrasion performance, PTFE coatings, water-based coatings with high solid content, special coatings containing sand and so on.

The air cap is made of environmentally friendly copper alloy after five-axis CNC machining. Each atomizing cap has undergone professional testing and test spraying to prevent poor atomization during spraying, thereby reducing the defective rate caused by spray gun spraying in production.

According to different installation methods, the spray gun body is designed with a Φ16mm mounting hole to fit the mounting bracket for general scenes, or it can be used with our company's professional mounting bracket.

WE'LL BE GLAD TO ANSWER YOUR QUESTIONS, PROVIDE SUPPORT OR OFFER QUOTES ON OUR PRODUCTS.

CONTACT NOW

PRODUCT DISPLAY

Product application introduction

Because of its high cost performance, spray guns are widely used in automatic spraying machines such as automatic assembly lines, small spraying machines, automatic spraying machines, reciprocating spraying machines, robots, and robotic arms. With the intelligentization of equipment, manual operations have been replaced.

PAINT-SAVING SPRAY GUN