Manual Double Head Spray Gun |

这里可以自定义设置

Product features introduction

① Nano spray plating, written as silver mirror coating, is a new coating process that uses the principle of silver ammonia reaction to replace the silver ion in silver nitrate through the medium to form a mirror effect.

② Nano plating used by the raw materials are strongly corrosive, therefore, the industry must use super corrosion resistant treatment, the rest of the ordinary spray gun can not be used!

③ Each gun body has a unique gun body code, conducive to after-sales tracking and service.

④ Here, Chang YUAN reminds you: tools must choose special tools, including accessories consumables inside. Because the raw materials of nano plating contain corrosive atoms, do not choose ordinary tools in the process of selecting tools. Due to the replacement of iron elements, the surface will appear yellow, black, fog phenomenon.

⑤ K solvent, is an important link in nano plating, mainly on the surface of the workpiece after chemical treatment in this link, the solvent used has super corrosive, including the supply system, are made of super corrosion resistant materials.

Of course, airbrush is no exception. The spray GUN IS MADE OF 316 stainless STEEL AS the liquid runner, USING the structure principle of the general spray gun, after special processing and production, using the operation of the ordinary spray gun, to complete the process of work.

Product parameter form

All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.

Model	Type of Feed		Nozzle Diameter(mm)		Air Pressure（MPa）	Usage of air(l/min)	Spray amount of paint(ml/min)
H-2-C2-08P	Pressure Feed Type（0.25MPa～0.6MPa) Air Suction Type		0.8		0.25～0.4	520	400
H-S2-C2-10P			1.0			550	600
H-S2-C2-13P			1.3			590	850
H-S2-C2-15P			1.5			600	1100
H-S2-C2-18P			1.8			618	1350
H-S2-C2-20P			2.0			650	1450
Spraying swath(mm)		Air cap models are available		Air tube dimensions(mm)		Paint tube size(mm)	weight(G)
320		S2-R10		4*6 Parallel tube PTF462		4*6 Parallel tube PTF462	495
380		S2-R10
515		S2-R10
980		S2-R12
1200		S2-R14
1550		S2-R20

◎It will vary with the paint volume, spray width, paint viscosity and pressure

这里可以自定义设置

Product details

The spray gun made of electroplating process breaks the oxidation phenomenon of the traditional spray gun in the humid environment, and can resist corrosion and friction.

The spray gun nozzle is made of 304 stainless steel, which is resistant to corrosion and abrasion. At the same time, it is equipped with a compound needle with a patent number of CN107081232A to adapt to special performance coatings. Such as: ceramic coatings with high abrasion performance, PTFE coatings, water-based coatings with high solid content, special coatings containing sand and so on.

The air cap is made of environmentally friendly copper alloy after five-axis CNC machining. Each atomizing cap has undergone professional testing and test spraying to prevent poor atomization during spraying, thereby reducing the defective rate caused by spray gun spraying in production.

Product application introduction

Now it is widely used in the surface treatment process of mobile phone shell, jewelry, household appliances and so on. Has begun to form industrialization in the coating industry.

WE'LL BE GLAD TO ANSWER YOUR QUESTIONS, PROVIDE SUPPORT OR OFFER QUOTES ON OUR PRODUCTS.

CONTACT NOW

PRODUCT DISPLAY

PAINT-SAVING SPRAY GUN