Spray gun for spraying silicone materials (FM-191)

Silicone spray paint can be a handy tool for various projects. 

Silicone spray paint is typically used for protecting and lubricating surfaces. 

It offers a protective coating that is resistant to moisture, heat, and contaminants. It can be useful for surfaces such as metal, plastic, rubber, and even wood. 

Just make sure to follow the instructions carefully and apply it in a well-ventilated area. 

FM-191 is the most suitable gun for robot or reciprocator spraying.

The needle nozzle adopts the principle of anodic treatment, bidding farewell to the era of needle nozzle wear and leakage, and saying no to violence. 

Test data show that in emery, stone Under the liquid wash of Ying sha, the minimum service life has exceeded 9.6 million times under the impact of 0.6Mpa air pressure.

The atomizing cap uses RP technology of low pressure and high atomization to make atomization soft and beautiful. 

RP Low flow pressure atomization mode: RP(Reduced = reduced Lower; The paint saving and efficient spray gun series is the most advanced atomization technology, which combines the advantages of traditional

spray gun and HVLP spray gun, and the air Pressure of the spray cap is about 1.2-1.3 bar; The paint transfer efficiency is more than 65%, but the air consumption is lower than the traditional spray gun (295 liters per

minute, intake pressure 2.5 bar), and the operation is very close to the traditional spray.

The low pressure gun emits a slower flow of air than the general purpose gun. 

"Slow air flow speed" means that the force is weak relative to the direction of air flow. In other words, less bounce. By When the spray air pressure is low, it is not afraid of strong bouncing back to the air, and the paint

particles are easy to adhere to the sprayed material.