Double station glaze spraying

The Special G series spray gun for ceramic glaze.

The needle tip is made of composite material with good abrasion resistance, and after oxidation and abrasion resistance treatment, the abrasion resistance of the spray gun is 3 times better than that of ordinary spray guns. 

The special angle of the nozzle and the needle makes the nozzle wear-resistant for 9.5 million times under 6.5 Bar air pressure without deformation. 

Combined with the excellent atomisation of the universal spray gun, it can spray all mainstream ceramic glazes.

Needle and nozzle by special hardening treatment, not easy to wear, specific excellent wear resistance.

Suitable for abrasive coating of enamel glaze, ceramic glaze and so on.

We have obtained the requirements for the tool, the special G series spray gun, the use of good wear resistance alloy material to make the needle nozzle, anti-oxidation wear-resistant treatment, the wear resistance

of G series spray gun is better than the ordinary spray gun 3 times. The special nozzle and the needle Angle, the number of needle nozzle wear can be hit 9.5 million times under 0.65MPa air pressure, combined with

the excellent atomization of the general spray gun, the spray gun has been favored by the public in the daily ceramic industry.

Feldspar glaze is hard, strong luster, milky and soft, but the expansion coefficient is large, easy to produce crack glaze. Mostly used in porcelain and hard fine pottery and other products. The lime shaft has high

hardness, much gloss and high transparency, but the melting range is narrow, and it is easy to cause smoke when it is fired in the original atmosphere.