Robot/repeater and other automatic external control environmental spray gun

Robot/repeater and other automatic external control environmental spray gun demonstration video

The FM-191 low pressure air atomizer is a cost-effective spray gun with the highest level of control and maintainability.

The FM-191 is designed for most general industrial coatings and finishing operations and is suitable for use in water-based or solvent-based coatings.

FM-191 is designed for specialized water-based ceramic and enamel coating applications in the toilet ware and glass markets.

Effectively customize the automatic spray gun to adapt to industry 4.0, through special flow design and unique atomization design, can effectively save paint 10% ~ 35% efficient spray gun in low-pressure

environment, specially designed piston structure (has been patented), can extend the service life of the spray gun 3 times.

Flexible installation mode, suitable for robot installation, robot arm installation, conveyor arm installation, assembly line installation, with CNISOO painting tools.

The needle nozzle adopts the principle of Yin and Yang of Taiji, bidding farewell to the era of needle nozzle wear and leakage, and saying no to violence. 

Test data show that in emery, stone Under the liquid wash of Ying sha, the minimum service life has exceeded 9.6 million times under the impact of 0.6Mpa air pressure.

The atomizing cap uses RP technology of low pressure and high atomization to make atomization soft and beautiful. RP Low flow pressure atomization mode: RP(Reduced = reduced Lower; The paint saving and

efficient spray gun series is the most advanced atomization technology, which combines the advantages of traditional spray gun and HVLP spray gun, and the air Pressure of the spray cap is about 1.2-1.3 bar; The

paint transfer efficiency is more than 65%, but the air consumption is lower than the traditional spray gun (295 liters per minute, intake pressure 2.5 bar), and the operation is very close to the traditional spray.

The low pressure gun emits a slower flow of air than the general purpose gun. "Slow air flow speed" means that the force is weak relative to the direction of air flow. In other words, less bounce. By When the spray

air pressure is low, it is not afraid of strong bouncing back to the air, and the paint particles are easy to adhere to the sprayed material.

Although water-based coatings are increasingly popular, organic solvent coatings are still used. From the perspective of improving the spraying operation, the spray spray will pollute the spray room and the foreign

body of the spraying operator. Low pressure spray gun paint spatter less, extend the spray room maintenance period, say to spray operators pollution control in a minimum. Thus, the purpose of improving the

working environment is achieved.

Save 45% of paint waste.

Extreme fine atomization 5 microns

Spray pressure 1.8Bar save 15% paint.